Item 1
CV Single Flap Wafer Check Valve• CI Body / SS Disc and Spring
• ‘O’ Ring Provides Seal – available with EPDM only
• Sizes Available 2″ – 36″ (up to 12″ off the shelf)
• PN16 Pressure Rating
• Item Code: (xx)MG
• Dimensions, Flow, Pressure Drop and Installation Tips in PDF

Item 2
CV Double Door Wafer Check Valve• CI Body / SS Discs and Spring
• Captured EPDM seal
• Sizes Available 2″ – 12″
• PN16
• Item Code: (xx)WDDC

Item 3
SS Double Door Wafer Check Valve• SS316 Body, Doors
• Seat – NBR, EPDM, VITON, Metal/Metal
• Sizes Available 11/2″ – 24″
• PN16 / PN40
• Item Code: (xx)VTDWC

Item 4
CV Narrow SS Wafer Single Check Valve• SS Body, Discs and Spring
• O’Rings both sides and for flap sealing
• Sizes Available 2″ – 16″
• PN16
• Item Code: (xx)MGSS

Item 5
Valvetek Stainless Steel Disc Non Slam Wafer Check Valve• 1/2″ – 4″
• Maximum CWP 40 Bar
• Opens around 2-3 psi
• Item Code: (xx)VTWC

Item 6
Valvetek Stainless Steel Disc Non Slam Check Valve (BSP ends)• 1/4″ – 4″ (stocked up to 2″)
• Maximum CWP 40 Bar
• Opens around 2-3 psi
• Item Code: (xx)V3WC

Item 7
Valvetek Stainless Steel Piston Check Valve• 1/4″ – 2″
• Maximum CWP 40 Bar
• S/S Disc, PTFE Seat
• Item Code: (xx)VTP

Item 8
Valvetek Stainless Steel Swing Check Valve• 1/4″ – 3″
• Maximum CWP 200 PSI

• Item Code: (xx)VTC

Item 9
Valstop Check Valves (Foot valve when Strainer added)• BSP ends
• Rated to 40 bar up to 3/4″, larger sizes 25 Bar
• Suitable for water, air, NBR gasket material

• Item Code: (xx)VS

Item 10
Europa Check Valves• BSP ends 3/8″ to 4″
• Horizontal Disc Type – Soft Seat with SS backing
• Suitable for water, air, NBR gasket material

• Item Code: (xx)EUROPA

Item 11
Bronze Lift Check Valves• BSP ends
• WOG 300 psi, Steam 150 psi
• 3/8″ to 3″

• Item Code: (xx)F

Item 12
Bronze Screwed BSP Swing Check Valves• 1/2″ – 3″
• Rated up to 200psi
• Suitable for hot/cold water, oil, steam
• checked and pressure tested

Item 13
CV Brass Screwed BSP Swing Check Valves• 21/2″ – 3″
• Class 125
• Suitable for hot/cold water, oil

Item 14
CV Bronze Screwed BSP Swing Check Valves• 21/2″ – 3″
• Rated up to 300psi
• Suitable for hot/cold water, oil, steam

Item 15
Cast Iron Ball Check Valve BSP or Table E• 1″ – 3″ BSP
• 11/4″ – 20″ Table E

• Item Code: (xx)BCCI BSP
• Item Code: (xx)BCCITE Table E

Item 16
Valvetek Stainless Steel Swing Check Valve Flanged• 1/2″ – 12″

• Item Code: (xx)VTWCF

Item 17
Class 800 Check ValveNPT / BSP / SW

Item 18
200/H200 series• 0-3000 psi / 0-6000 psi
• Brass / SS303 / SS316
• Buna N, Viton, PTFE, Silicon, Kalrez

Item 19
2200 series 

• 0-800 psi
• Brass / SS316

Item 20
2300 series 

• 0-10000 psi
• up to 3/4″ or 1″ depending on ends